Setup card operations
Give a title to the selected file.
9 Turn the JOG dial button to move the arrow (cursor) to the WRITE item.
< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
nWRITE CARD CONFIG READ USER DATA
TITLE :
10 When the JOG dial button is pressed, the following message appears.
< CAM CARD READ/WRITE >
READ
SELECT :1
WRITE
SELECT :1
CARD CONFIG
READ USER DATA
TITLE :
WRITE ?
YES
n
NO 
TITLE : 
11 Turn the JOG dial button to move the arrow (cursor) to YES, and press the JOG dial button. When the data saving is completed, the following message appears.
< CAM CARD READ/WRITE >
READ
SELECT :1
WRITE
SELECT :1
CARD CONFIG
READ USER DATA
TITLE :
WRITE OK
YES
nNO
TITLE :
To save the VTR unit’s data, open the VTR CARD READ/WRITE screen, and perform steps 9 to 11.
If one of the following messages appears when the JOG dial button is pressed, the data cannot be saved.
Error message | Remedial action |
|
|
WRITE NG | Insert the card. |
NO CARD |
|
(setup card has not been |
|
inserted) |
|
|
|
WRITE NG | The card was formatted by a |
FORMAT ERROR | device other than the unit. |
(formatting error) | Replace the card. |
|
|
WRITE NG | The card may be defective. |
ERROR | Replace it. |
(the data cannot be saved) |
|
|
|
12 Press the MENU button to exit the menu operations.
The setting menu is cleared, and the display showing the unit’s current statuses appears at the top and bottom of the viewfinder screen.
62
