Manuals / JVC / Home Audio / Stereo System

JVC MX-GT700 manual Troubleshooting, 23, English, Unable to cancel the display demonstration

Models: MX-GT700

1 60

Download 60 pages 42.7 Kb

Page 58

Manual background

English

Troubleshooting

If you are having a problem with your unit, check this list for a possible solution before calling for service.

If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer, for service.

Symptom

Unable to cancel the display demonstration.

No sound is heard.

Hard to listen to broadcasts because of noise.

The disc sound is discontinuous.

The carrousel does not open or close.

The disc does not play.

The cassette holders cannot be opened.

Impossible to record.

Operations are disabled.

Unable to operate the unit from the remote control.

Cause

Other buttons are pressed to cancel the display demonstration.

Connections are incorrect or loose.

•Antennas are disconnected.

•The AM loop antenna is too close to the unit.

•The FM antenna is not properly extended and positioned.

The disc is scratched or dirty.

•The AC power cord is not plugged in.

•The carrousel is locked.

The disc is placed upside down.

Power supply from the AC power cord has been cut off while the tape was running.

Small tabs on the back of the cassette are removed.

The built-in microprocessor may malfunction due to external electrical interference.

•The path between the remote control and the remote sensor on the unit is blocked.

•The batteries are exhausted.

Action

Press CANCEL/DEMO on the unit. (See page 8.)

Check all connections and make corrections. (See pages 6 to 8.)

•Reconnect the antennas correctly and securely.

•Change the position and direction of the AM loop antenna.

•Extend the FM antenna at the best position.

Clean or replace the disc. (See page 22.)

•Plug the AC power cord.

•Unlock the carrousel. (See page 15.)

Place the disc with the label side up.

Turn on the unit.

Cover the holes with adhesive tape.

Unplug the AC power cord and then plug it back in.

•Remove the obstruction.

•Replace the batteries.

– 23 –

Image 58

JVC MX-GT700 manual Troubleshooting, 23, English, Unable to cancel the display demonstration

Contents

SP-MXGT700 COMPACT COMPONENT SYSTEMINSTRUCTIONS CA-MXGT700Caution –– STANDBY/ON switch Warnings, Cautions and Others– G-1– For U.S.AFor Canada/pour le Canada – G-2–For Canada/pour le Canada Power sources PrecautionsInstallation IntroductionUsing the Timers Contents– 2 – MaintenanceFront Panel Location of the Buttons and Controls– 3 – Front Panel – 4 –Display window Remote Control – 5 –Getting Started Connecting AntennasPutting the Batteries into the Remote Control – 6 –2Insert the end of the speaker cord into the Connecting Speakers– 7 – terminal– 8 – Connecting Other EquipmentCancelling the Display Demonstration On the unit ONLY1 Press CLOCK/TIMER Turning On or Off the PowerSetting the Clock 2 Press 4or ¢to adjust the hour, then press SET– 10 – Adjusting the VolumeTo turn down the volume level temporarily Reinforcing the Bass SoundTuning in a Preset Station Tuning in a StationPresetting Stations On the remote control Press and hold 4/1orPlaying Back CDs SKIP on the remote controlALL DISC indicator lights up on the display – 12 –3 Press one of the disc number – 13 –Basic CD Operations buttons CD1, CD2 or CD32 Press PROGRAM so that – 14 –On the unit ONLY 1 Load CDs “PROGRAM” appears on theRepeating Tracks or CDs—–RepeatPlay – 15 –Playing at Random—–RandomPlay Prohibiting Disc Ejection—–TrayLockPlaying Back a Tape Playing Back Tapes– 16 – 1 Press EJECT 0 for the deck you want to useRecording a Tape on Deck B Recording– 17 – 5 Press REC START/STOPCD Synchronized Recording – 18 –Dubbing Tapes On the unit ONLY 1 Press TAPE 3, then2 Press CLOCK/TIMER again Using the TimersUsing Daily Timer 1 Press CLOCK/TIMER repeatedly7 Press 4or ¢ to set the volume level Using Recording Timer6 Select the preset station number Timer setting6 Select the preset station Using Sleep TimerTimer Priority On the remote control ONLY– 22 – MaintenanceCleaning the unit Handling discsTroubleshooting – 23 –Amplifier section—CA-MXGT700 Specifications– 24 – Amplifier section—CA-MXG500Authorized Service Centers Do not service the television yourselfTOLL FREE: 1 800 HOW TO LOCATE YOUR JVC SERVICE CENTERWHAT YOU MUST DO FOR WARRANTY SERVICE 1 YRLIMITED WARRANTY WHAT IS NOT COVEREDMEMO MEMO 0102KSMMDWSAM VICTOR COMPANY OF JAPAN, LIMITED— Composé du CA-MXGT700et SP-MXGT700 SYSTEME DE COMPOSANTS COMPACTMX-GT700 — Consists of CA-MXGT700and SP-MXGT700 MX-G500 — Consists of CA-MXG500and SP-MXG500– G-1– Caution –– STANDBY/ON switchWarnings, Cautions and Others For U.S.AFor Canada/pour le Canada English Français– G-2– For Canada/pour le CanadaInstallation EnglishPrecautions Power sourcesMaintenance ContentsUsing the Timers Troubleshooting– 3 – Location of the Buttons and ControlsFront Panel English– 4 – EnglishEnglish Remote Control– 5 – 1STANDBY/ON button 9 2 SLEEP button 3 AUX buttonGetting Started Connecting AntennasPutting the Batteries into the Remote Control – 6 –To connect an outdoor AM antenna 2Insert the end of the AM loop antenna cordinto the terminal Connecting SpeakersConnecting Other Equipment Canceling the Display DemonstrationFor MX-GT700 To remove the speaker grilles To cancel the display demonstration, pressSetting the Clock 2 Press 4or ¢ to adjust the hour, then press SETTurning On or Off the Power 1 Press CLOCK/TIMER– 10 – Adjusting the VolumeTo turn down the volume level temporarily Reinforcing the Bass SoundTuning in a Preset Station Tuning in a StationPresetting Stations On the remote control Press and hold 4/1orWhen playing a CD-Ror CD-RW SKIP on the remote controlALL DISC indicator lights up on the display Playing Back CDsPress DISC SKIP on the remote control 1 DISC indicator lights up on the2 Press REPEAT repeatedly so that the – 13 –2 Press PROGRAM so that – 14 –On the unit ONLY 1 Load CDs “PROGRAM” appears on thefor the disc you want to play Press one of the disc numberbuttons CD1, CD2, and CD3 then pressPlaying Back a Tape Playing Back Tapes– 16 – 1 Press EJECT 0 for the deck you want to useRecording To protect your recordingTo clean the head, capstan, and pinch roller – 17 –CD Synchronized Recording – 18 –Dubbing Tapes On the unit ONLY 1 Press TAPE 3, then2 Press CLOCK/TIMER again Using the TimersUsing Daily Timer 1 Press CLOCK/TIMER repeatedlyPut a recordable cassette into deck B Press CLOCK/TIMER repeatedly3 Press CLOCK/TIMER again Using Recording Timer6 Select the preset station Using Sleep TimerTimer Priority On the remote control ONLYTo clean the disc MaintenanceCleaning the unit – 22 –– 23 – TroubleshootingUnable to cancel the display demonstration EnglishSupplied accessories SpecificationsSupplied accessories – 24 –0202KSMMDWSAM EN, FRVICTOR COMPANY OF JAPAN, LIMITED