JVC MX-GT700 Connecting Other Equipment, Cancelling the Display Demonstration, On the unit only

Connecting Other Equipment

You can connect both analog and digital equipment.

•DO NOT connect any equipment while the power is on.

• DO NOT plug in any equipment until all connections are complete.

To connect an analog component

Be sure that the plugs of the audio cords are color coded: White plugs and jacks are for left audio signals, and red ones for right audio signals.

NOW, you can plug in the unit and other connected equipment FINALLY!

Cancelling the Display Demonstration

When connecting the AC power cord into a wall outlet, the unit automatically starts display demonstration.

On the unit ONLY:

To cancel the display demonstration, press	/DEMO
	CANCEL
CANCEL/DEMO.

To audio output

AUX IN

Audio/video equipment

When you press other buttons

The display demonstration stops temporarily. It will start automatically again (if no operation is done for 2 minutes) until you cancel it by pressing CANCEL/DEMO.

To start the display demonstration manually

Press and hold CANCEL/DEMO again for more CANCEL

/DEMO

than 2 seconds.

For playing the other equipment through this unit,

connect between the audio output jacks on the other equipment and AUX IN jacks by using audio cords (not supplied).

To connect audio equipment with an optical digital input terminal

You can record CD sound onto the connected digital equipment.

DIGITAL OUT	Protective
( OPTICAL )
	plug

Before connecting the other equipment, remove the protective plug from the terminal.

	Audio equipment
	with an optical digital
To optical	input
digital input

Connect an optical digital cord (not supplied) between the optical digital input terminal on the other equipment and the DIGITAL OUT [OPTICAL] terminal.

– 8 –