JVC MX-GT700 Basic CD Operations, Press one of the disc number Buttons CD1, CD2 or CD3, Load CDs

3 Press one of the disc number	CD	1	CD	2	CD	3
buttons (CD1, CD2 or CD3)

for the disc you want to start to play from.

CD play starts from the first track of the selected disc.

•Pressing CD 6 instead of the disc number buttons starts playing back if a CD is on the trays.

To stop during play, press 7.

To remove the disc, press 0.

CD playback sequence

When 3 CDs are loaded on the disc trays, they are played in one of the following sequences.

•When CD1 is pressed : CD1 ]CD2 ]CD3 (then stops)

•When CD2 is pressed : CD2 ]CD3 ]CD1 (then stops)

•When CD3 is pressed : CD3 ]CD1 ]CD2 (then stops)

*When only 2 CDs are loaded, they are played in the same order, but the disc tray without a CD is skipped.

One Disc play

When more than 2 CDs are loaded on the disc trays, you can select one particular disc to be played back.

Basic CD Operations

While playing a CD, you can do the following operations.

To exchange CDs during playback of another

Press DISC CHANGE to change the CD and the DISC CHANGE carrousel comes out.

If you change CDs during play, the current play will not stop until all CDs you have changed are played.

To close the carrousel, press DISC CHANGE or 0.

To skip to the another CD in the carrousel

Press DISC SKIP on the remote control.	DISC
	SKIP

To stop play for a moment

Press CD 6.

While pausing, “PAUSE” appears on theCD display.

To resume play, press CD 6again.

1 Load CDs. REPEAT PROG

• If the current playing source is not the CD player, press CD 6, then 7 before going to the next step.

2 Press REPEAT repeatedly so that the 1 DISC indicator lights up on the display.

To locate a particular point in a track

During play, press and hold 1 or ¡.

•1: Fast reverses the disc.

•¡: Fast forwards the disc.

When using the remote control, press and hold 4/1or ¢/¡.

•Each time you press the button, the indication on the display changes as follows:

ALL DISC 1 DISC REPEAT 1*

(initial setting)

To go to another track

Press 4or ¢repeatedly before or during playback.

• 4: Goes back to the beginning of the current or previous tracks.

•¢: Skips to the beginning of the next or succeeding tracks.

REPEAT ALL DISC* REPEAT 1 DISC*

*See page 15.

3 Press one of the disc number		1		2		3
buttons (CD1, CD2 or CD3) you	CD		CD		CD

want to listen.

Playback stops when all tracks of the selected disc are played once and resumes to All Disc play.

To stop during play, press 7.

To remove the disc, press 0.

To exit from One Disc Play, press REPEAT repeatedly so that ALL DISC indicator lights up on the display.

The following operations will also cancel the One Disc play and restore All Disc play when—

If you press and hold 4or ¢ on the unit before playing

The track number keeps changing until you release it.

To go to another track directly using the number buttons

Pressing the number button(s) before or during play allows you to start playing the track number you want.

Ex.: For track number 5, press 5.	1	2	3
For track number 15, press +10,	4	5	6
then 5.
For track number 20, press +10,	7	8	9
then 10.	10	+10
For track number 32, press
+10, +10, +10, then 2.

• Turning off the power,

• Ejecting the carrousel, or

• Changing the source to play.

– 13 –