JVC MX-GT700 manual Sleep

English

4 Set the on-time you want the unit to turn on. 1) Press 4or ¢ to set the hour, then

press SET.

2) Press 4or ¢ to set the minute, then press SET.

SET

“OFF TIME” appears for 2 seconds, then the unit enters off-time setting mode.

5 Set the off-time you want the unit to turn off (on standby).

1) Press 4or ¢ to set the hour, then press SET.

2)Press 4 or ¢ to set the minute, then

press SET.	SET
The unit enters preset station selecting
mode.

6 Select the preset station.

1) Press 4or ¢ to select the band (“TUNER FM” or “TUNER AM”), then press SET.

2)Press 4 or ¢ to select a preset channel number, then press SET.

	The REC (recording timer) indicator stops			SET
	flashing and remains lit. The settings you
	have done are shown on the display in
	sequence for your confirmation.
7	Press	STANDBY/ON to	STANDBY

Using Sleep Timer

With Sleep Timer, you can fall asleep to music. You can set Sleep Timer when the unit is turned on.

How Sleep Timer actually works

The unit automatically turns off after the specified time length passes.

On the remote control ONLY:
1 Press SLEEP.	SLEEP

The time length until the shut-off time appears and the SLEEP indicator starts flashing on the display.

•Each time you press the button, the time length changes as follows:

SLEEP10 SLEEP20 SLEEP30 SLEEP60

OFF SLEEP120 SLEEP90

(Canceled)

2 Wait for about 5 seconds after specifying the time length.

The SLEEP indicator stops flashing and remains lit.

To check the remaining time until the shut-off time, press SLEEP once so that the remaining time until the shut-off time appears for about 5 seconds.

To change the shut-off time, press SLEEP repeatedly until the desired time length appears on the display.

To cancel the setting, press SLEEP repeatedly until “OFF” appears on the display so that the SLEEP indicator goes off from the display.

turn off the unit (on standby) if necessary.

STANDBY/ON

• Sleep Timer is also canceled when you turn off the unit.

About the recording source

If you change the source while recording, the recording source also changes.

To turn on or off Recording Timer after its setting is done

1 Press CLOCK/TIMER repeatedly until	CLOCK
“REC” appears on the display.	/TIMER
2 To turn off the Recording Timer, press
CANCEL/DEMO.	CANCEL
The REC (recording timer) indicator goes off	/DEMO
from the display (“OFF” appears for a while).
The Recording Timer is canceled, but the
setting for the Recording Timer remains in
memory until you change it.
To turn on the Recording Timer, press SET.	SET
The REC (recording timer) indicator lights up
on the display. The settings you have done are
shown on the display in sequence for your
confirmation.

Timer Priority

Since each timer can be set separately, you may wonder what happens if the setting for these timers overlaps.

Here are some examples.

•Recording Timer has priority over Daily Timer.

If Recording Timer is set to come on while Daily Timer is operating, Daily Timer is canceled and Recording Timer

start working.

AM 6:00 6:30	7:00	7:30
Recording Timer
Daily Timer
	canceled.

•If Sleep Timer overlaps with another timer (either Daily Timer or Recording Timer), a timer with the earlier shut-off

time has priority.

AM 6:00 6:30	7:00		7:30
Sleep Timer
Recording Timer
		canceled.

When using the Recording Timer and Sleep Timer at the same time, pay special attention to the shut-off time.

– 21 –