Panasonic AJ-HDC27A operating instructions VTR VF Indicator screen, MIC/AUDIO screen

Setting menu screens (VTR MAIN MENU)

VTR VF INDICATOR screen

The information to be displayed in the viewfinder is set on this screen.

Item	Variable	VF	Remarks
	range	display
TAPE (IND)	ON	USER	For switching the
	OFF	ENG	remaining tape display to
			ON or OFF.
BATTERY (IND)	ON	USER	For switching the battery
	OFF	ENG	voltage display to ON or
			OFF.
LEVEL METER	CH1	USER	For selecting what the
(IND)	CH1•CH2	ENG	audio level meter is to
	OFF		display.
			CH1:
			The level of the CH1
			signals only is displayed.
			CH1•CH2:
			The levels of both the
			CH1 and CH2 signals
			are displayed.
			CH2:
			The level of the CH2
			signals only is displayed.
			OFF: No display.
AUDIO IN (IND)	ON	USER	For switching the audio
	OFF	ENG	input display to ON or
			OFF.
			ON : The audio input is
			displayed.
			OFF : The audio input is
			not displayed.
TC (IND)	ON	USER	For switching the time
	OFF	ENG	code display to ON or
			OFF.
			ON : The time code is
			displayed.
			OFF : The time code is not
			displayed.
VTR WARNING	ALWAYS	USER	For setting when the
(IND)	NORMAL	ENG	VTR’s warnings are to be
	OFF		displayed.
			ALWAYS:
			The warning display
			always appears when a
			warning has occurred.
			NORMAL:
			The display appears for
			3 seconds after the
			warning occurred and for
			3 seconds after
			recording was started or
			completed.
			OFF:
			The warning displays do
			not appear.

Item	Variable	VF	Remarks
	range	display
SAVE LED	SAVE&TAPE	USER	For setting the operation
	SAVE	ENG	of the SAVE lamp.
			SAVE:
			This lights when the VTR
			SAVE/STBY switch has
			been set to SAVE.
			It goes off during
			recording.
			SAVE&TAPE:
			This lights when the VTR
			SAVE/STBY switch has
			been set to SAVE.
			It goes off during
			recording.
			When the tape is
			approaching its end, it
			flashes in tandem with
			the warning alarm that
			sounds when tape-end is
			approaching.

MIC/AUDIO screen

The MIC/AUDIO settings are performed on this screen.

Item	Variable	VF		Remarks
	range	display
FRONT MIC	ON	USER	ON	: The phantom power
POWER	OFF	ENG		is supplied to the
				front microphone.
			OFF : The phantom power
				is not supplied to the
				front microphone.
MIC LOWCUT	FRONT	USER	For setting the high-pass
CH1	REAR	ENG	filter for the CH1 mic input.
	F&R		FRONT: The high-pass filter
	OFF			for the front mic
				input is set to ON.
			REAR : The high-pass filter
				for the rear mic
				input is set to ON.
			F&R	: The high-pass
				filters for both the
				front and rear mic
				inputs are set to
				ON.
			OFF	: The high-pass filter
				for the CH1 input
				is set to OFF.

<Note>

The frequency characteristics in the MIC LOWCUT ON mode are 200 Hz to 10 kHz.

The underlining in the variable range column indicates the setting in the preset mode.

98