CD/MD Messages
English
For CD:
Message | Signification | Solution |
CANNOT PLAY
CD NO DISC
CANNOT REC x1 REC ONLY
You are trying to play back a CD which cannot be played or there is a problem with the CD.
•No disc is on the disc tray.
•You are trying to play back a
You are trying to record a CD onto a MD and a tape at the same time using x2 or x4 speed recording.
Change the CD.
•Place a disc on the disc tray.
•This is not a malfunction. You can play back “finalized”
This is not a malfunction. Select normal recording speed (x1). (See page 40.)
For MD:
Message
BLANK DISC
CANNOT ENTRY!
CANNOT FORM!
CANNOT GROUP!
CANNOT JOIN
CANNOT LISTEN
CANNOT TITLE
CANNOT REC x1 or x2 ONLY
READ ERROR
DISC FULL
DISC
PROTECTED
Signification
The disc is blank.
The track has already been in the selected group.
You are trying to form a new group including other groups.
There is no more space for storing information concerning MD group.
You are trying to join tracks (shorter than 8 seconds) or groups which cannot be joined.
You are trying to listen to the sound during
You are trying to enter the title on the MD which already has over 1 792 characters in total.
You are trying to record a CD in program play or random play mode using x4 speed recording.
The UTOC fails to be read.
There is no more space on the MD or there are over 254 tracks.
MD is
Solution
Change the MD if you want to enjoy playback.
This is not a malfunction.
(See “Adding a Track to a Group— ENTRY GR” on page 45.)
This is not a malfunction.
(See “Forming a
You cannot form a group any more on the MD.
This is not a malfunction. (See pages 47, 53 and 66.)
This is not a malfunction.
You cannot listen to the sound during
This is not a malfunction.
(See “Assigning Titles to an MD” on page 56.)
This is not a malfunction. Select other recording speeds. (See page 36.)
Turn off the unit, then turn on it again.
Use another recordable MD or erase some tracks.
Unprotect the MD or use another. (See page 34.)