English
Selecting the Sources and Starting Play | Adjusting the Volume | |
|
|
|
To select the tuner or external equipment as the source
On the remote control:
Press FM/AM/AUX.
The unit automatically turns on (when the unit is in standby), and the last selected source appears in the main display.
• Each time you press the button, the source changes as follows:
FM 
AM
AUX
On the main unit:
•Press FM/AM to select the tuner.
–Each time you press the button, the band alternates between FM and AM.
•Press AUX/DVD to select the external equipment.
•For more detailed tuner operations, see pages 16 to 18.
•For operating the external equipment, see pages 31 and 32 and the manuals supplied with it.
To select the CD player as the source, press CD 3/8. The unit automatically turns on (when the unit is in standby), and “CD READING” appears in the main display for a while.
•Play will start if a CD is on the disc tray.
•“CD NO DISC” will appear in the main display if a CD is not loaded.
To stop playback, press 7.
• For more detailed operations, see pages 19 to 22.
To select the MD player as the source, press MD 3/8. The unit automatically turns on (when the unit is in standby), and “MD READING” appears in the main display for a while.
•Play will start if an MD is in the MD loading slot.
•“MD NO DISC” will appear in the main display if an MD is not loaded.
To stop playback, press 7.
• For more detailed operations, see pages 23 to 28.
To select the tape as the source, press TAPE 2 3. The unit automatically turns on (when the unit is in standby), and “TAPE” appears in the main display.
•Play will start if a tape is in the cassette holder. To stop playback, press 7.
•For more detailed operations, see pages 29 and 30.
You can adjust the volume level only while the unit is turned on.
• The volume level has no effect on recording.
On the remote control:
To increase the volume, press VOLUME + . To decrease the volume, press VOLUME
•When you press and hold each button, you can change the volume level continuously.
On the main unit:
To increase the volume, turn VOLUME + / – control
clockwise.
To decrease the volume, turn VOLUME + / – control counterclockwise.
•You can adjust the volume level within the range of 0 (silent) to 40 (maximum).
If “CANNOT LISTEN” appears in the main display
During
For private listening
Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers. Be sure to turn down the volume before connecting or putting on the headphones.
DO NOT turn off (on standby) the unit with the volume set to an extremely high level; Otherwise, the sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the unit or start playing any source.
REMEMBER you cannot adjust the volume level while the unit is in standby mode.
