English
Basic CD Operations
While playing a disc, you can do the following operations.
To stop playback for a moment
Press CD 3/8.
The CD indicator and the elapsed playing time start flashing on the display.
•When the
To resume playback, press CD 3/8 again.
To locate a particular point in a track during play
Press and hold ¢ or 4.
•¢:
•4:
To go to another track
Press ¢ or 4 repeatedly.
•¢: Skips to the beginning of the next or succeeding tracks.
•4: Goes back to the beginning of the current or previous tracks.
To go to another track directly using the number buttons
On the remote control ONLY:
Pressing the number button(s) allows you to start playing the track number you want.
Ex.: For track number 5, press 5.
For track number 15, press +10, then 5. For track number 20, press +10, then 10.
For track number 32, press +10, +10, +10, then 2.
To change the information shown in the main display
On the remote control ONLY:
Each time you press DISP/CHARA, the information in the main display alternates between the source indication and the clock indication.
•If an MD is inserted, the MD remaining recording time (“REC REMAIN”) is shown before the clock indication.
About CD indicator
A disc is | During | During |
loaded | playback | pause |
Programing the Playing Order of the Tracks
—Program Play
You can arrange the order in which the tracks play before you start playing. You can program up to 32 tracks.
On the remote control ONLY:
1 Load a disc.
2 Press CD 3/8, then 7.
The source is changed to “CD.”
3 Press PLAY MODE repeatedly so that “CD PROGRAM” appears in the main display.
The PRGM (program) indicator lights up on the display.
•Each time you press the button, play mode changes as follows:
CD PROGRAM 
CD RANDOM
Normal play
4 Press the number buttons to select the tracks.
•For how to use the number buttons, see “To go to another track directly using the number buttons” in
the left column.
PRGM indicator | Step No. |
The last programedTotal playing time track No.
Ex.: 8 tracks have been programed.
5 Press CD 3/8.
The tracks are played in the order you have programed. Program play ends when all the programed tracks are played once (when Repeat play is not activated).
To stop during play, press 7.
The last programed track number and total playing time appear in the main display.
To exit from Program play mode, press PLAY MODE once or twice so that the unit enters another playback mode (Random play or Normal play mode) before or after play.
