JVC LVT0900-004A, CA-UXZ7MD manual Putting the Batteries into the Remote Control, R6PSUM-3/AA15F

English

NOW, you can plug in the unit and other connected equipment FINALLY!

SPEAKERS
R	L
CAUTION: R	L

SPEAKER IMPEDANCE 4~16Ω

To a wall

outlet

AC power cord

When you connect the AC power cord into a wall outlet, the unit automatically starts display demonstration (Automatic display demonstration).

•Each time you press and hold COLOR/DEMO (or COLOR on the remote control) for more than 2 seconds, Automatic display demonstration turns on and off alternately.

To stop and cancel the display demonstration, press COLOR/DEMO (or COLOR on the remote control) during display demonstration while the unit is in standby mode.

•Pressing DIMMER or DISP/CHARA on the remote control also cancels the display demonstration.

–When you press DIMMER while the unit is in standby mode, the unit lets you know the time with tones (see page 12).

–Each time you press DISP/CHARA while the unit is in standby mode, the clock indication turns on and off alternately (see page 12).

To start the display demonstration manually, press COLOR/DEMO (or COLOR on the remote control) while the unit is in standby mode.

•Each time you press the button, the display demonstration alternates between on and off.

Putting the Batteries into the Remote Control

Insert the batteries—R6P(SUM-3)/AA(15F)—into the remote control, by matching the polarity (+ and –) on the batteries with the + and – marking on the battery compartment.

When the remote control can no longer operate the unit, replace both batteries at the same time.

1

2

R6P(SUM-3)/AA(15F)

3

•DO NOT use an old battery together with a new one.

•DO NOT use different types of batteries together.

•DO NOT expose batteries to heat or flame.

•DO NOT leave the batteries in the battery compartment when you are not going to use the remote control for an extended period of time. Otherwise, it will be damaged from battery leakage.

– 9 –