English
5 Enter characters.
1)Press DISP/CHARA to select the character set you want.
•Each time you press the button, the character set changes as follows:
Capital letters & |
| Small letters & |
Symbols |
| Symbols |
Numerals
2)Press the character entry button for a character you want to input.
Ex.:
•To enter an “A” or “a,” press ABC once. To enter a “B” or “b,” press ABC twice.
To enter a “C” or “c,” press ABC three times.
•To enter a symbol, press MARK repeatedly until the mark you want appears.
•To enter a numeral, press 0 – 9.
•To enter a space while entering a title, press 
twice.
•To move the character entry position while
entering a title, press 
or 
*.
•If you have entered an incorrect character, press
or 
to select the character you want to correct, then press CANCEL to delete it.
*If you press 
repeatedly during recording, the entered characters may be displayed incorrectly. In this case, press TITLE/EDIT or GROUP TITLE/EDIT, then repeat from step 2 again.
3)Repeat steps 5 – 1) and 5 – 2) to enter other characters.
• If the character you want to enter next is assigned to the same button you have just pressed in step
5 – 2), press 
once to move the character entry position to the right.
• The main display can only show 6 characters at a time. If you enter the 7th character, the first character disappears, and so on.
6 Press ENTER to finish the current title entry.
The next title entry screen appears.
•For the disc title:
The track title entry screen for the track 1 appears.
•For the track title:
The next track title entry screen appears (or the unit exits from the title entry screen if the current track is the last one on the disc).
•For the group title:
The next group title entry screen appears (or the same screen still remains if the current group is the last one on the disc).
If you want to go on assigning a name, repeat steps 3 to 6.
7 Press CANCEL to exit from the title entry mode.
•When recording, do not go to the next step until the recording ends.
8 Press MD 0 on the main unit to eject the MD.
“WRITING” and the MD REC indicator flash while the editing you have made is being recorded on the MD.
