JVC CA-UXZ7MD, LVT0900-004A Moving a Track-MOVE, Press ¢or 4to select the track you want to move

Moving a Track—MOVE

This function allows you to move a track to the position you prefer. It is useful to change the order of the tracks as you like.

Once a track is moved, the tracks and/or the groups are renumbered.

•To stop any time during the editing process before step 8, press TITLE/EDIT.

On the remote control ONLY:

In the following example, the process is explained from the very first—that is, inserting a disc. You can also edit an MD during playback (in Normal play mode).

1 Insert an MD you want to edit into the MD loading slot.

2 Press TITLE/EDIT repeatedly until “MOVE ?” appears in the main display.

•If the loaded MD has no track, “MOVE ?” will not appear.

•If you want to stop this editing process, press

CANCEL.

3 Press SET.

•If the loaded MD has only one track, you cannot go to the following steps.

4 Press ¢or 4to select the track you want to move.

•You can select the track using the number buttons. In this case, the selected track starts playing repeatedly.

5 Press SET.

•To cancel the setting, press CANCEL, then repeat from step 4.

6 Press ¢or 4to select the position where you want to move the track.

•You can select the track using the number buttons. In this case, the selected track starts playing repeatedly.

Ex.: When track 3 is moved to track 8.

•If the track selected in this step belongs to a group, the track selected in step 4 will be entered into the same group after moving.

7 Press SET.

•To cancel the setting, press CANCEL, then repeat from step 4.

8 Press ENTER.

“EDITING” appears in the main display for a while, then “WRITING” and the MD REC indicator flash while the editing you have made is being recorded on the MD.

English

Ex.: When track 3 is selected.

– 54 –