HOW TO USE CUSTOM PROGRAMS
1Insert the key fully into the console.
See GETTING STARTED on page 10.
display will flash to alert you, and three tones will |
|
sound. When the first segment is completed, | all |
speed settings will move one column to the left | . |
The speed setting for the second segment will |
|
then be shown in the flashing Current Segment |
|
column and the treadmill will automatically adjust |
|
to the speed and incline settings for the second |
|
2 Select one of the custom programs.
When the key is in- serted, the manual mode will be selected. To select one of the custom programs, press the Select Program but- ton repeatedly until the
Learn 1 or Learn 2 indicator lights.
Learn Indicator |
segment. |
|
|
The program will continue until the speed setting |
| |
for the last segment is shown in the Current |
| |
Segment column and no time remains in the |
| |
Time/Laps display. The walking belt will then slow |
| |
to a stop. |
|
|
If desired, you can redefine to the program while |
| |
using the program. | To change the speed or in- |
|
cline setting during the current segment, | sim- | |
When a custom program is selected, the program display will show a simplified profile of the pro- gram. The Time/Laps display will show how long
the program will last. Note: If only three columns of indicators are lit in the program display, see HOW TO CREATE A CUSTOM
PROGRAM on page 14.
Press the Start button or the Speed + button to
3 start the program.
A moment after the button is pressed, the tread- mill will automatically adjust to the first speed and incline settings for the program. Hold the handrails and begin walking.
Each program is divided into several
speed setting for the first segment will be
shown in the flashing Current Segment col- umn of the program dis- play. (The incline set-
tings are not shown in
the program display.) The speed settings for the next five segments will be shown in the five columns to the right.
When only three seconds remain in the first seg- ment of the program, both the Current Segment column and the column to the right will flash and a tone will sound. In addition, if the speed and/or incline of the treadmill is about to change, the Speed/Pace display and/or the Distance/Incline
ply press the Speed or Incline buttons. When the |
| |||
current segment is completed, the new setting will be |
| |||
saved in memory. | To increase the length of the |
| ||
program, | first wait until the program is completed. |
| ||
Then, press the Start button and program speed and |
| |||
incline settings for as many additional segments as |
| |||
desired. ( | Note: While you are adding segments to |
| ||
the program, the speed settings in the program |
| |||
display will not move to the left. Instead, each time |
| |||
a segment is completed, |
| the flashing Current |
| |
Segment column will move one column to the |
| |||
right. If the Current Segment column reaches the |
| |||
right side of the program display, when the current |
| |||
segment is completed |
| all columns of indicators in |
| |
the program display will move three columns to |
| |||
the left.) | When you have added as many seg- |
| ||
ments as desired, press the Stop button twice. | To | |||
decrease the length of the program, | press the |
| ||
Stop button twice at any time before the program is |
| |||
completed. |
|
|
|
|
To stop the program temporarily, press the Stop button. All displays will pause and the Time/Laps display will begin to flash. To restart the program, press the Start button or the Speed + button. To end the program, press the Stop button, remove
the key, and then reinsert the key.
4 Follow your progress with the displays.
See step 5 on page 11.
5 Measure your heart rate, if desired.
See step 6 on page 12.
6 When the program has ended, remove the key.
See step 6 on page 13.
15
