remote control
The CR10 remote control
The CR10 is
The CR10 requires a clear line of sight to the front panel display of A18 to ensure reliable operation. Make sure you have inserted the two AAA batteries supplied before attempting to use the CR10.
Keys on the CR10 that control the A18 are shown not
Inserting batteries into the remote control
1.Squeeze the tab and lift off the remote control’s battery compartment cover.
2.Insert the two ‘AAA’ batteries supplied in the proper direction, following the ‘+’ and
3.Replace the battery compartment cover, locking the tab with a click.
����
���� ���������
����� ���� ��� ���
� 
� 
�
�
�
�
�
�
�
�
�����
����� ���� ����
����
��� ��� �� ���
��� ��� �� ���
���� ���� ��� ����
���� ���� ����
���������
����
Amplifier commands
-Toggles the mute function to silence speaker output. Mute is displayed on screen when active.
Vol – | Decrease | |
VOL + | amplifer volume | |
Source | Selects the amplifier input: | |
keys | DVD | DVD input |
| SAT | Satellite decoder input |
| AV | AV (television sound) input |
| TUN | DAB/FM/AM tuner input |
| AUX | Auxiliary line input |
| PVR | Personal Video Recorder input |
| CD | CD input |
| PHO | Phono input |
BASS | Adjust bass levels (using Vol– and Vol+ | |
| controls) between | |
TREB | Adjust treble levels (using Vol– and Vol+ | |
| controls) between | |
BAl | Adjust balance levels (using Vol– and Vol+ | |
| controls) between L (left) 9, through 0, to | |
| R (right) 9 | |
PROC | Toggles between PROC ON and OFF. | |
| PROC mode is only available if the AV input | |
| is selected | |
| When in PROC mode, the Vol - and Vol + | |
| can be used to adjust the PROC volume | |
| setting. |
|
DRCT | Toggles direct mode (i.e. tone defeat) | |
Disp | Cycles through display panel brightness | |
| options (bright, off, dim) | |
Mode | Cycles through displaying the settings for | |
| Bass, Treble and Balance | |
