A18 Connections | Arcam FMJ A18 instruction

A18

		Speaker terminals	Phono earth terminal
			For
	See page 8 for information on		For	connecting your turntable
	connecting loudspeakers.		earth lead, if required. Note that
Power inlet			this terminal must not be used as a
Power inlet				safety earth.
Connect the correct				safety earth.
Connect the correct
mains cable here.



Voltage select	Pre-amplifier connection		Audio connections

Ensure that the voltage selected	This socket is only used if you are using		The labels above the connectors give suggested
matches your local power supply.	the A18 as a pre-amp, for example, when		audio inputs, although any suitable device may be
	using the A18 in conjunction with a P38		connected to the line-level inputs. (Note, however,
		in a bi-amplified system.	that the name of the input shown on the front-panel
	See page 8 for more information.		display cannot be changed.)
	See page 8 for more information.		DVD, SAT, TUNER and CD are all line-level inputs. The
			DVD, SAT, TUNER and CD are all line-level inputs. The
			phono (MM) input has different characteristics – see
			page 12 for the specification.
			In addition to the line level inputs, the AV and PVR
			connectors both have line level outputs for use in
			recording from other sources.
			See page 7 for more information.

Note

Please read the ‘Placing the unit’, ‘Power’ and ‘Interconnect cables’ sections on page 5 before connecting up your A18 integrated amplifier!

Aux input

Analogue 3.5mm stereo jack socket, intended for connecting a portable MP3 player.

��

Phones

3.5mm stereo jack socket, intended for use with a set of headphones.

E-6