JVC UX-H33 Listening to FM and AM Broadcasts Continued, Tuning in to a Station, the band, seconds

Listening to FM and AM Broadcasts Continued

Tuning in to a Station

1 Press TUNER (or BAND	TUNER
TUNER on the unit) to select
the band.
The unit automatically turns on and
tunes in to the previously received	BAND
	TUNER
station—either FM or AM.

•Each time you press the button, the band alternates between FM and AM.

2 Press and hold ¢ or

4for more than 1 second.

The unit starts searching for

stations and stops when a station of sufficient signal strength is tuned in.

•If a program is broadcast in stereo, the STEREO indicator lights up.

To stop searching, press ¢ or 4.

When you press ¢ or 4 briefly and repeatedly

The frequency changes step by step.

To change the FM reception mode
On the remote control ONLY:
When an FM stereo broadcast is hard to	FM MODE
receive or noisy, press FM MODE so that
the MONO indicator lights up on the
display. Reception will improve.

To restore the stereo effect, press FM MODE again so that the MONO indicator goes off. In stereo mode, you can hear stereo sound when a stereo program is broadcast.

Presetting Stations

You can preset 30 FM and 15 AM stations—using

either automatic presetting or manual presetting. In some cases, test frequencies have been already memorized for the tuner since the factory examined the tuner preset function before shipment. This is not a malfunction.

To preset stations automatically—Automatic presetting

You need to preset stations separately for the FM and AM bands.

On the remote control ONLY:

1 Press TUNER to select the	TUNER
band.

The unit automatically turns on and tunes in to the previously received station—either FM or AM.

•Each time you press the button, the band alternates between FM and AM.

2 Press and hold AUTO	PRESET
	AUTO
PRESET for more than 2
seconds.

Local stations with strong signals are

searched for and stored in memory automatically. When automatic presetting is over, the station stored in preset number 1 is tuned in.

•Storing new stations erase the previously stored one.

3Repeat steps 1 and 2 to store stations for the other band.

When you cannot automatically store stations you want

Stations with weak signals cannot be detected with automatic presetting. To store such stations, use manual presetting.

English

12