![](/images/new-backgrounds/1267132/267132123x1.webp)
14
15
NETWORK MENU
Set the IP address of the WINDOWS pc running SyncThru in step1. For example, if the IP address is 155.213.211.12, follow these steps:
aPress Item until
bPress Value until 155 appears on the display.
cPress Enter/Cancel.
dPress Item until
ePress Value until 213 appears on the display.
fPress Enter/Cancel.
gPress Item until
hPress Value until 211 appears on the display.
iPress Enter/Cancel.
jPress Item until
kPress Value until 12 appears on the display.
lPress Enter/Cancel.
Reset printer and the firmware will be upgraded.
Notes: After the ”Completed. Network Card will start about 30secs
later” message is displayed on SyncThru, click OK.
It may take a few seconds to write the new file to Firmware. Normally 30 seconds is sufficient.
USING OPERATOR PANEL 3.27