USING WINDOWS POSTSCRIPT DRIVER

C.1

Installing PS Driver
Important:
•
You must have the CD(or diskette) for “windows 95”
or Windows 98” available for use.
• You cannot use PS in Windows 3.1.
PPDs, in combination with the PostScript driver, access the
printer features and allow the computer to communicate
with the printer. An installation program for the PPDs is
provided on the ML-7300 CD-ROM.
Notes:
•Installing the PostScript printer driver may require
the use of the operating system files on the original
CD-ROM or diskette that came with your system.
•If you have a PostScript level 3 driver and want to
use it, you must install the PostScript level 3 PPD
which is also provided on the ML-7300 CD-ROM.
1
Before installing PPD files, make sure that the printer and
the PC are properly connected with parallel or optional
network interface. For information on:
• Connecting with parallel interface, see page 2.8.
• Connecting with an optional network interface,
see Appendix F, “Network Option Card”.
2
Insert the CD-ROM shipped with your printer into your
CD-ROM drive.
If the CD-ROM drive does not automatically run:
Select Run from the Start menu, and type
x:\cdsetup.exe in the Open box (where xis the
drive letter for the CD-ROM drive), then click OK.