
Printer Memory
3Unpack the memory option.
Notes: Avoid touching the connection points along the edge.
Save the packaging.
4Hold the memory option with the connection points pointing toward the connector and position the notch as shown. Insert the memory option all the way into the connector at a 30O
angle, and rotate it left until it snaps into place.
Notch |
Connection points |
5Make sure both metal clips on the connector are fastened, and the two pins on each of the connectors are pushed through the holes on the memory option.
6Continue with ‘Closing the Printer Cover’ on page F.3.
7Set the printer memory item on the printer tab of the properties dialogue box to the value of the added printer memory.
F.6 PRINTER OPTIONS