Other connections
Important
If you have followed the steps above, and still can’t hear any audio output, try the following:
•Switch the amplifier off, then on again.
•Selecting another input source (like CD or TAPE), then back to USB.
Caution
•Make sure you don’t switch off the computer or unplug the USB cable during playback.
•To prevent noise being output, don’t use other software on your computer during playback.
•Pioneer is not responsible for computer system damage, software crashes or failures, or any other possible computer problems due to this configuration.
Microsoft®, Windows® XP, Windows® 2000, Windows®
Millennium Edition, Windows® 98, and Windows NT® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Connecting an additional amplifier
This amplifier has more than enough power for any home use, but it’s possible to add an additional amplifier using the
•Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet.
CONTROL
USB | OUT |
AUDIO IN |
|
|
|
|
|
| SIGNAL |
|
|
|
| L | GND |
|
|
|
| L | |
REC |
| PLAY |
| R | R |
|
|
| MM/MC | ||
OUT |
| IN |
|
| |
|
|
|
| ||
PRE | TAPE | TUNER | AUX | CD | PHONO |
OUT |
|
|
|
|
|
This amplifier
| INPUT |
|
Stereo amplifier | R | L |
ANALOG |
|
05
English Deutsch Français Italiano Nederlands Español
15
En
