05Other connections
Operating other Pioneer components with this unit’s sensor
Many Pioneer components have SR CONTROL jacks which can be used to link components together so that you can use just the remote sensor of one component. When you use a remote control, the control signal is passed along the chain to the appropriate component.
•Note that if you use this feature, make sure that you also have at least one set of analog audio jacks connected to another component for grounding purposes.
1Connect the CONTROL OUT of this amplifier to the CONTROL IN jack of another Pioneer component.
Use a cable with a mono
This amplifier
Pioneer |
|
component | CONTROL |
remote | OUT |
| |
control |
|
| SIGNAL |
| GND |
| L |
Pioneer component
CONTROL
IN OUT
2If the Pioneer component also has a CONTROL OUT jack, you can continue the chain in the same way for as many components as you have.
16
En
