PROBLEM SOLVING

7.10

PS(PostScript) Problems
1Open the Properties of PS driver.
2Click on PostScript.
3Click on the Advanced button.
4The pure binary data is not supported.
Choose the others.
The Error messages
(This job contains
binary data...) are
printed.
1Open the PS driver Properties.
2Set ‘Optional Tray 2’ item of Device Option to
installed.
The Optional Tray2 is
not selected in PS
driver.
Network Problems
There are two methods.
• On the printer front panel, you can set IP
address in Network Menu. You can find the
following menu.
”NETWORK MENU ➜CFG NET ➜TCP/IP ➜
CFG TCP ➜CFG ADRS”
You cannot see any of
DHCP server, BOOTP
server or RARP server,
when you want to set IP
address to print server.
Problem Solution
Problem Solution