NETWORK MENU
Resetting PortThru
To reset PortThru
1
2
3
4
Press On Line/Continue. OFFLINE appears on the display.
Press Menu until NETWORK MENU appears on the display.
Press Item until RESET NIC appears on the display.
Press Enter and READY appears on the display.
Configuring Network setting for PortThru
To configure network settings for PortThru.
1Press On Line/Continue. OFFLINE appears on the display.
2Press Menu until NETWORK MENU appears on the display.
3Press Item until CFG NET appears on the display.
4Press Value until YES appears on the display.
5Press Enter and you can configure the following network settings now.
6Skip this step if you don’t want to configure TCP/IP. Press Item until
TCP/IP appears on the display.
aPress Value until ON appears on the display.
bPress Enter and PortThru can use TCP/IP
for communicating.
cPress Item until CFG TCP appears on the display.
dPress Value until YES appears on the display.
ePress Enter and you can select the IP address assign ment method.
fPress Item until the IP address assignment method you want appears on the display.
gSelect the YES by pressing the Value button.
hPress Enter.
iSkip this step if you don’t select CFG ADRS as the IP address assignment method. Enter the IP address,
Subnet mask, Default gateway by using Item, Value and Enter buttons.
USING OPERATOR PANEL 3.21
