Scan to PC Setup (FTP)
3.Click [Scan to Home].
4.Click [General].
5.On the [Scan to Home] page:
a.On the [Status] line, place a check mark in the [Enabled] box.
b.In the [Friendly Name] box, type in a
c.On the [Determine Home Directory] line, select the method of determining the home directory.
Selecting [LDAP Query] queries the LDAP server with the user’s authenticated login name and retrieves the user’s home directory to set up the template scanning path to that directory.
Selecting [No LDAP Query] uses the path specified under [Network Home Path].
d.When [LDAP Query] was selected in step c, click [LDAP Mapping for Home Directory], and then specify an LDAP home directory.
When [No LDAP Query] is selected in step c, specify a base directory path in [Network Home Path].
e.If required, create a scanning subdirectory within the user’s home directory, by enabling [Automatically Create Subdirectory] and then specifying a general name in [Subdirectory].
f.If required, set [Append “User Name” to Path], [Automatically Create “User Name” directory if one does not exist], [Directory Structure], and [Use Domain For Authenticated User].
NOTE: [Use Domain For Authenticated User] is supported by the WorkCentre 5225A/ 5230A only.
Scan to PC Setup (FTP)
Files can be scanned on the multifunction machine and routed on to a server or a client using FTP protocol. Directory structures (repositories) need to be created on the server to hold the scanned documents.
Prerequisites for Scan to PC Setup (FTP)
1.Confirm that an existing operational network utilizing TCP/IP is available.
2.FTP Server/Client exists and is running.
3.A repository (folder) needs to be created on the FTP server to hold the scanned document.
4.Confirm that the following ports are enabled:
1)TCP/IP
2)FTP Client
Data to Set Up Scan to PC | Install | Comments | |
(FTP) | Requirement | ||
|
Repositories need to be set up on Required the FTP server.
This is the location or path of the directory for saving scanned documents.
291
