15 Problem Solving
Code | Description and Remedy |
|
|
|
|
The scanned document is | |
| Using the Machine chapter in the User Guide, to verify the types of documents |
| that can be copied. |
|
|
An error occurred when Tray 1 was used. Switch off the machine, and then | |
switch it on again. Contact the Xerox Welcome Center if the problem persists. | |
|
|
An error occurred when Tray 2 was used. Switch off the machine, and then | |
switch it on again. Contact the Xerox Welcome Center if the problem persists. | |
|
|
An error occurred when Tray 3 was used. Switch off the machine, and then | |
switch it on again. Contact the Xerox Welcome Center if the problem persists. | |
|
|
An error occurred when Tray 4 was used. Switch off the machine, and then | |
switch it on again. Contact the Xerox Welcome Center if the problem persists. | |
|
|
An error occurred with the Two Tray Module or the High Capacity Tandem Tray. | |
| Switch off the machine, and then switch it on again. Contact the Xerox Welcome |
| Center if the problem persists. |
|
|
An error occurred when the Two Tray Module was used. Switch off the machine, | |
| and then switch it on again. Contact the Xerox Welcome Center if the problem |
| persists. |
|
|
An error occurred when Tray 1 of the High Capacity Tandem Tray was used. | |
| Switch off the machine, and then switch it on again. Contact the Xerox Welcome |
| Center if the problem persists. |
|
|
An error occurred when Tray 2 of the High Capacity Tandem Tray was used. | |
| Switch off the machine, and then switch it on again. Contact the Xerox Welcome |
| Center if the problem persists. |
|
|
An error occurred in the High Capacity Feeder. Switch off the machine, and then | |
| switch it on again. Contact the Xerox Welcome Center if the problem persists. |
|
|
Tray 5 (Bypass) malfunctioned. Switch off the machine, and then switch it on | |
again. If the problem persists, contact the Xerox Welcome Center. | |
|
|
An error occurred in the High Capacity Feeder. Switch off the machine, and then | |
| switch it on again. Contact the Xerox Welcome Center if the problem persists. |
|
|
The | |
| Check the number, and try again. |
|
|
The hole punch waste container is full. Empty the container. | |
| For information on how to empty the hole punch waste container, refer to |
| Emptying the Hole Punch Waste Container (Optional) on page 37. |
|
|
The machine failed to move onto the Download mode. Contact the Xerox | |
| Welcome Center. |
|
|
The Printer or PostScript kit is attached to an improper slot on the controller | |
| board. Attach the Printer or PostScript kit to the correct slot. |
|
|
Unable to print | |
| installed correctly. If the problem persists, contact the Xerox Welcome Center. |
|
|
Data was printed using a substitute font. Check the print data. | |
|
|
An error occurred during PostScript processing. Check the print data, or disable | |
| |
|
|
The data was divided because the hard disk ran out of space. Delete | |
| unnecessary data from the hard disk. |
|
|