Stapler Faults

Staple Jams in the Integrated Office Finisher (Optional)

The following describes how to clear staple jams when the Integrated Office Finisher (optional) is installed.

1.Make sure that the machine has

stopped, and then open the front cover on the Integrated Office Finisher.

2.Take the staple cartridge out of the finisher.

3.After removing the staple

cartridge, check the inside of the Integrated Office Finisher for any remaining staples.

4.Pull up the front lever on the staple cartridge.

5.Remove the entire staple sheet including the jammed staple.

NOTE: Remove the entire staple sheet. Do not remove the jammed staple only.

363

Page 363
Image 363
Xerox 5225A, 5230A manual Staple Jams in the Integrated Office Finisher Optional