|
| Common Problems |
|
|
|
| Symptom | Recommendation |
|
|
|
|
|
|
| Misregistration on a | When printing a name card from Tray 5 |
| business cards. | (Bypass), the lead edge registration may be |
|
| different between side 1 and side 2 |
|
| (maximum 4.4 mm). |
|
| • Adjust the position of the image on the |
|
| output copy paper. Refer to Image Shift in |
|
| the Copy chapter of the User Guide. |
|
|
|
| Output does not reflect the selections made | • Select [Save] after each selection on the |
| on the touch screen. | touch screen, if available. |
|
|
|
| The finisher does not stack output correctly. | • Check that the paper tray guides are |
|
| locked into position against the paper. |
|
|
|
| Pages in the set are not stapled. | • Check that the paper tray guides are |
|
| locked into position against the paper. |
|
|
|
| Paper delivered to an output tray is not | • Flip over the paper stack in the paper tray, |
| properly stacked up. | or rotate it head to toe. |
|
|
|
| Paper curls. | • Check that the paper is loaded correctly. |
|
| Load paper in Trays 1, 2, 3 and 4 seam |
|
| side up. |
|
| • Load paper in the High Capacity Tandem |
|
| Tray and Tray 5 (Bypass) seam side down. |
|
| • Load custom media in Tray 5 (Bypass). |
|
| • Refer to Paper and Other Media on |
|
| page 17 for procedures. |
|
|
|
| Cannot store a document for secure polling | • Cancel the operation, then repeat the |
| due to full memory. | same operation later when additional |
|
| memory is available. |
|
|
|
369