8 Printer Environment Settings

If problems are encountered during machine setup, refer to Problem Solving on page 349.

TCP/IP (LPD or Port9100) Environments

System configuration

As the machine supports the LPD and Port9100 protocol, you can print directly from a Windows computer.

When printing from Windows NT4.0/Windows 2000/Windows XP/Windows Server 2003/Windows Vista computers through the LPD port, use the OS standard LPR port.

When printing through Port9100, change the necessary settings on the computers. The transport protocol for LPD and Port9100 can be TCP/IP.

You will also need to set up the IP address on the machine and the Windows computers.

NOTE: Windows NT 4.0 does not support printing through Port9100.

Target computers

The following computers support printing through LPD or Port9100.

Connection

OS

Protocol

 

 

 

 

 

 

LPD port

Windows NT 4.0

TCP/IP

 

Windows 2000

 

 

Windows XP

 

 

Windows Server 2003

 

 

Windows Vista

 

 

 

 

Port9100

Windows 2000

TCP/IP

 

Windows XP

 

 

Windows Server 2003

 

 

Windows Vista

 

 

 

 

NOTE: The optional PostScript Kit is required when you print from a Macintosh.

TCP/IP (LPD or Port9100) Installation

This section describes how to set up the machine to use the LPD and Port9100 protocols.

Installation Procedure

There are three stages to enable printing on the machine through LPD or Port9100.

Network Communication Setup

Enable the following ports using the touch screen or CentreWare Internet Services.

Printing through LPD: LPD port

Printing through Port9100: Port9100 port Set the IP address using the touch screen.

264

Page 264
Image 264
Xerox 5230A, 5225A manual TCP/IP LPD or Port9100 Environments, TCP/IP LPD or Port9100 Installation