Xerox 5230A, 5225A manual Date Format, Default Watermark Effect, Font Size

Models: 5230A 5225A

1 454
Download 454 pages 48.56 Kb
Page 76
Image 76

6 Setups

The following explains how to adjust the fold and staple positions.

1.Select [Booklet fold Position, smaller than B4] or [Booklet Fold Position, B4 or larger], and then select [Change Settings].

2.Select [Sample Printout], and then select the tray to output a sample printout for. Press the <Start> button.

3.Select the option that best describes the current fold and staple positions.

4.Enter the desired fold and staple positions into [A] and [B].

5.Select [Adjust] to apply the settings.

6.Select [Sample Printout] and then select the tray again, to output a sample printout. Check with the sample printout that the fold and staple positions have been adjusted.

Delete All Certificates/Initialize Settings (WorkCentre 5225A/5230A)

Deletes all certificates stored in the machine, and initializes the security settings associated with the certificates.

Watermark

This feature allows you to set the defaults for date and text information which can be added to the output as a watermark, for document management control.

1.Select [Watermark] in the [Features] menu.

2.Change the required settings. Use the side tabs to switch between screens.

3.Select [Close].

Date Format

Specifies the current date. Select from three date formats: 20yy/mm/dd, dd/mm/20yy, mm/dd/20yy.

Default Watermark Effect

Specifies the default setting of the Text Effect feature.

Off

Does not use the Text Effect feature.

Embossed

Embosses background text.

Outline

Prints the outline of background text.

Default Watermark

Specifies the default watermark text from a list of preset and custom text strings.

Font Size

Specifies the default watermark font size. You can select from three preset font sizes or specify a value between 24 and 80 points using the scroll buttons.

76

Page 76
Image 76
Xerox 5230A, 5225A manual Date Format, Default Watermark Effect, Font Size