Xerox 5230A Extended Tray Module, Auto Job Promotion, Default Print Paper Size, Odd Page 2 Sided

Models: 5230A 5225A

1 454
Download 454 pages 48.56 Kb
Page 78
Image 78

6 Setups

Extended Tray Module

Select the type of Extended Tray Module used. If the Left Side Tray is installed, select [Offset Module] to use the Center Tray.

Auto Job Promotion

Specifies whether jobs can automatically be promoted, bypassing other jobs, when the machine is unable to complete the current job. For example, if there is no paper in the required paper tray for the current job.

NOTE: Stored documents, such as secure prints and sample prints, cannot be promoted.

Default Print Paper Size

Specifies the paper size to be used as the initial setting.

Odd Page 2 Sided

Specifies whether to add a blank page to a document that contains an odd number of pages, so that the document prints as an even number of pages.

Paper Size Settings

Specifies the paper size table used when the machine is set to detect standard sizes of documents and recording media automatically.

You can select from the following tables: [A/B Series (8 × 13”)], [A/B Series], [A/B Series (8K/16K)], [A/B Series (8 × 13”/8 × 14”)], and [Inch Series].

NOTE: When loading trays with postcards, contact the Xerox Welcome Center to have the tray settings changed specially for the use of postcards.

Documents

The machine automatically recognizes the sizes listed on the following page when a document is placed on the document glass or loaded in the document feeder.

78

Page 78
Image 78
Xerox 5230A Extended Tray Module, Auto Job Promotion, Default Print Paper Size, Odd Page 2 Sided, Paper Size Settings