System Settings
Sender ID
Specifies whether to notify the remote machine of the machine’s
Save Undelivered Faxes
Specifies whether to save fax documents that could not be sent. Select [Yes] to display the Undelivered Faxes feature in the [Secure Print Jobs & More] tab in Job Status, from where you can resend the fax document.
Save Deleted Faxes
Specifies whether to store fax documents where the fax transmission was forcibly deleted.
Saved Faxes - Auto Delete
Specifies whether to automatically delete stored documents.
Transmission Interval
Specifies the period between transmissions within the range of 3 to 255 seconds using the scroll buttons or the numeric keypad on the control panel. The longer the transmission interval, the longer the total time spent for operation, but the machine can receive faxes during the standby time.
Batch Send
Specifies whether to send pending documents to an identical destination as a batch with a single transmission thereby reducing telephone charges.
Manual Send/Receive Default
Specifies the default for whether the [Manual Receive] or [Manual Send] button is to be selected when you use the
Fax Receiving Mode
Specifies the default for fax reception mode. Select from [Auto Receive] and [Manual Receive].
Border Limit
Specifies the value to divide a document onto two pages when the received documents are longer than the loaded paper size. Enter a value within the range of
5.0inches) using the scroll buttons or the numeric keypad on the control panel. We recommend you use this feature with the following [Auto Reduce on Receipt] feature.
Auto Reduce On Receipt
Specifies whether to reduce and reproduce an image onto a single page if the received document length exceeds the length of the loaded paper, but is within the value set in the Border Limit feature. We recommend you use this feature with the [Border Limit] feature. If this feature is set to [No] and the document length exceeds the paper length, image loss may occur.
Tray for Printing Incoming Faxes
Specifies the trays for incoming faxes. You can select one or more trays except Tray 5 (Bypass). If the trays selected here run out of paper, Tray 5 (Bypass) is used.
113
