Xerox 5230A, 5225A manual Protocol Settings

Models: 5230A 5225A

1 454
Download 454 pages 48.56 Kb
Page 92
Image 92

6 Setups

FTP Client

Specifies whether to enable the FTP Client port.

Receive E-mail

Specifies whether to enable the mail receiving port.

Send E-mail

Specifies whether to enable the mail transmission port.

E-mail Notification Service

Specifies whether to enable the mail notification service.

UPnP Discovery

Specifies whether to enable the UPnP port, and specifies the port number.

WSD

Specifies whether to enable the WSD port, and specifies the port number.

Internet Services

Specifies whether to enable the Internet Services port, and specifies the port number.

SOAP

Specifies whether to enable the SOAP port, and specifies the port number to communicate with external applications.

WebDAV

Specifies whether to enable the WebDAV port, and specifies the port number and operation time limit.

Protocol Settings

This feature allows you to configure the machine settings that correspond with the protocol being used.

1.Select [Protocol Settings] in the [Features] menu.

2.Change the required settings. Use the scroll buttons to switch between screens.

3.Select [Close].

Ethernet Rated Speed

Specifies the Ethernet port speed according to the network environment to which the machine is connected.

TCP/IP - IP Mode

Specifies the IP operation mode. Selecting [Dual Stack] enables both IPv4 and IPv6 communications.

92

Page 92
Image 92
Xerox 5230A, 5225A manual Protocol Settings