Xerox 5230A, 5225A manual Connectivity Protocols, Tcp/Ip

7 CentreWare Internet Services

Feature		Setting items
Connectivity	Protocols	TCP/IP
	(continued)	Allows you to configure the TCP/IP settings.
		IP Mode:
		• IP Mode – Select an IP mode from [IPv4], [IPv6],
		and [Dual Stack].
		General:
		• Protocol – Displays whether the protocol is enabled
		or disabled.
		• Physical Connection – Displays “Ethernet”. This is a
		display-only item.
		• Host Name – Enter the host name. If you change the
		host name of TCP/IP, the host name of SMB also
		changes.
		IPv4:
		• IP Address Resolution – Allows you to set the
		method for obtaining the IPv4 address by using the
		drop down menu to access the following options.
		- STATIC: The user will specify all the addresses.
		- DHCP: The addresses will automatically be set via
		DHCP.
		- BOOTP: The addresses will automatically be set
		via BOOTP.
		- RARP: The addresses will automatically be set via
		RARP.
		- DHCP/Autonet: The addresses will be
		automatically set by Autonet via DHCP.
		• IP Address – Enter the IP address allocated to the
		machine in xxx.xxx.xxx.xxx format.
		• Subnet Mask – Enter the subnet mask in
		xxx.xxx.xxx.xxx format.
		• Gateway Address – Enter the gateway address in
		xxx.xxx.xxx.xxx format.
		IPv6:
		• Enable Manual Address – Select the check box to
		manually enter the IPv6 address and gateway
		address.
		• IP Address – Enter the IPv6 address in
		xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx format.
		• Automatically Configured Address 1 - 3 – Displays
		the automatically configured IPv6 global unicast
		addresses.
		• Link-Local Address – Displays the automatically
		configured IPv6 link local address.
		• Gateway Address – Enter the gateway address in
		xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx format.
		• Automatically Configured Gateway Address –
		Displays the automatically configured gateway
		address.
		Domain Name:
		• Domain Name – Enter the domain name.

190