15 Problem Solving
Integrated Office Finisher
Top Cover
Paper Jams in Cover A – page 353 Paper Jams in Cover B – page 354 Paper Jams in Cover C – page 355 Paper Jams in Cover E – page 355
Paper Jams in Trays 1 and 2, Trays 3 and 4 (Optional), and the Envelope Tray (Optional) – page 356
Paper Jams in the High Capacity Tandem Tray (Optional) – page 356 Paper Jams in Tray 5 (Bypass) – page 357
Paper Jams in the High Capacity Feeder (Optional) – page 357 Paper Jams in the Integrated Office Finisher (Optional) – page 359 Paper Jams in the Office Finisher LX (Optional) – page 359
Media jams happen for a variety of reasons. Check the guidelines below to reduce potential jams in the machine.
•Use only recommended media. Refer to Supported Paper Sizes in the Paper and Other Media chapter on page 23 and Appendix on page 431 for a list of recommended media types.
•Protect unused media by storing it in its wrapper, on a flat surface.
•The orientation of the media in the paper tray must match the orientation of the documents.
•Check the maximum fill line in the tray to make sure the paper tray is not overloaded.
•Do not use media that is torn, wrinkled, or folded.
