Paper Jams

Paper Jams in Tray 5 (Bypass)

Follow the steps below to clear paper jams in Tray 5 (Bypass).

1.Remove the jammed paper in

Tray 5 (Bypass).

Paper Jams in the Duplex Module Cover D (Optional)

Follow the steps below to clear paper jams in the Duplex Module.

1.Open Tray 5 (Bypass).

2.Open the Duplex Module Cover

D while lifting up the release lever.

3. Remove the jammed paper inside the Duplex Module.

4. Close the Duplex Module Cover D until it latches.

5. Close Tray 5 (Bypass).

Paper Jams in the High Capacity Feeder (Optional)

Follow the steps below to clear paper jams in/around the High Capacity Feeder (Tray 6).

At the Exit of Tray 6

1. Make sure that the screw is removed from the left side of Tray 6.

NOTE: The screw should have been removed during the installation of Tray 6.

357

Page 357
Image 357
Xerox 5225A, 5230A manual Paper Jams in Tray 5 Bypass, Paper Jams in the Duplex Module Cover D Optional, At the Exit of Tray