3 Maintenance
4.Pinch both sides of the empty staple case with your fingers (1), and remove the staple case from the cartridge (2).
2
1
1
5.Insert the front side of the new staple case into the staple cartridge (1), and then push the rear side into the cartridge (2).
6.Hold the staple cartridge by the orange lever, and insert it into the finisher until it clicks.
7.Close the front cover of the finisher.
2
1
NOTE: If the front cover is not completely closed, a message will appear and the machine will not operate.
Loading the Booklet Staples in the Office Finisher LX (Optional)
If the optional Booklet Maker is installed, a message appears on the touch screen when the unit runs out of staples. When the message is displayed, load a new staple cartridge into the Booklet Maker. The Booklet Maker contains two staple cartridges.
1.Make sure that the machine is not operating, and open the side cover of the finisher.
2.Hold the tabs on both sides of
the booklet staple cartridge and pull the cartridge out of the finisher.
36
