Xerox 5225A, 5230A Paper Tray Attributes During Loading, Paper Tray Priority, Paper Type Priority

System Settings

Paper Tray Attributes During Loading

Specifies whether to display the paper tray attributes on the control panel when the tray is opened to load paper. This setting does not apply to Tray 5 (Bypass).

Paper Tray Priority

Specifies the paper tray priority for Auto Tray Switching. Tray 5 (Bypass) is not available. To exclude a tray from Auto Tray Switching, select the tray and then select the [Exclude from Tray Switching] button. For more information on Auto Tray Switching, refer to Auto Tray Switching on page 22.

Paper Type Priority

Specifies the paper type priority for Auto Tray Switching. This setting overrides the Paper Tray Priority. If the priority of paper types is set to the same value, then Auto Tray Switching will select a tray based on the Paper Tray Priority. Selecting [Auto Paper Off] prevents the paper type from being used by Auto Tray Switching. For more information on Auto Tray Switching, refer to Auto Tray Switching on page 22.

Tray 5 - Paper Size Defaults

Specifies the default paper sizes to be displayed on the [Tray 5] screen of the [Paper Supply] feature. If you frequently use non-standard size paper for copying, assigning the paper size to a button will be helpful for you.

•A/B Series Size

Displays standard paper sizes of the A/B series.

•Inch Size

Displays standard paper sizes of the Inch series.

•Others

Displays other paper sizes.

•Custom Size

Allows you to enter a paper size. Specify the paper width (X) and the paper length

(Y).

Auto Tray Switching Control

Specifies whether to enable Auto Tray Switching. For more information on Auto Tray Switching, refer to Auto Tray Switching on page 22.

•Auto Tray Switching

Specifies the conditions to enable the Auto Tray Switching feature.

•Targeted Paper Type (Copy Jobs)

Targets some paper types according to the settings in [Paper Tray Priority] or only one paper type.

•Targeted Paper Color (Copy Jobs)

Targets all paper colors or only one paper color.

NOTE: In any of the following cases, Auto Tray Switching is not available.

–If Tray 5 (Bypass) is selected.

–If the specified tray holds paper other than Plain paper, Recycled paper, Side 2 paper, and Custom paper.

71