E-mail Environments

E-mail Environments

System Requirements

The following are required for the machine.

Some models require the optional Scan To E-mail Kit to send scanned documents as e-mail attachments.

The machine is connected to the network using TCP/IP.

The environment allows the sending and receiving of e-mail.

Item

Correspondent Specifications

 

 

 

 

ITU-T Recommendations

ITU-T T.37, T.30, F.185 and E.164

 

 

E-mail forwarding

RFC2304, RFC2305

 

 

DSN function

RFC1891, 1894

 

 

MDN function

RFC2298

 

 

SMTP receiving

RFC821, 822, 1869

 

 

POP3 receiving

RFC1939

 

 

MIME version

Version1.0 (RFC2049)

 

 

NOTE: A file may not be printed if the format differs from those in the above table.

NOTE: It is recommended to use Microsoft Outlook Express 5.5/6.0 or Netscape 7 as the e-mail software.

E-mail Installation

This section describes how to enable the e-mail feature.

Installation Procedure

To use the e-mail feature, configure the following settings on the machine.

Network Communication Setup

Use the touch screen to set the following ports to [Enabled].

Receive E-mail

Send E-mail

E-mail Notification Service Then, set the IP address.

Finally, set the other items required for the e-mail feature.

Test Mail

An e-mail job should be submitted to make sure that the machine has been installed and configured correctly.

277

Page 277
Image 277
Xerox 5225A, 5230A manual Mail Environments, Mail Installation, System Requirements, Correspondent Specifications, Test Mail