Authentication/Security Settings
1.Select [Authentication] in the [Group] menu.
Login Type
This screen allows you to select an authentication type.
NOTE: The available options vary depending on the machine configuration.
NOTE: When [Login to Local Accounts] is selected, authentication is carried out based on the user information set for the Accounting feature.
1.Select [Login Type] in the [Features] menu.
2.Select the required option.
3.Select [Save].
Access Control
This screen allows you to set whether to verify users when they access a target screen.
NOTE: The [Device Access] settings override the [Service Access] and [Feature Access] settings. The [Service Access] settings override the [Feature Access] settings.
1.Select [Access Control] in the [Features] menu.
2.Select the required button, and then change the settings as necessary.
3.Select [Close].
Device Access
Specifies whether to limit access to the following pathways.
•All Services Pathway - Verifies users when they access a service screen.
•Job Status Pathway - Verifies users when they access Job Status.
•Machine Status Pathway - Verifies users when they access Machine Status.
Service Access
Specifies whether to limit access to each service.
Selecting [Unlocked] for a service does not verify users upon accessing the service. Selecting [Locked (Show Icon)] verifies users, but shows the
service icon to unauthenticated users. [Locked (Hide Icon)] verifies users, and hides the service icon to unauthenticated users.
141
