IBM Tivoli and Cisco manual Configuring Cisco 3750 switch for NAC Appliance, Successful login

15.The end user is advised of successful login to the network (Figure 7-123).

Figure 7-123 Successful login

This concludes the basic configuration requirements for the CAREx on the CAM.

7.2.3 Deployment of the network infrastructure

In this section we describe how to configure the Cisco Catalyst 3750 switch for implementation in a NAC Appliance environment.

Configuring Cisco 3750 switch for NAC Appliance

NAC Appliance OOB only works with Cisco switches. If you are using hardware other than Cisco, this solution can still be deployed, but as in-band, which is beyond the scope of this book. For more information about switch compatibility for NAC Appliance refer to:

http://www.cisco.com/en/US/partner/products/ps6128/products_device_support_ table09186a00806f65fb.html

Example interface configuration for a NAC Appliance client:

interface FastEthernet1/0/12 description **Test CCA Client port** switchport access vlan 20 switchport mode access

snmp trap mac-notification added spanning-tree portfast

!

352Building a Network Access Control Solution with IBM Tivoli and Cisco Systems