IBM Tivoli and Cisco manual Example of Snmp configuration

Example of SNMP configuration:

snmp-server community public RW snmp-server community c3750_read RO snmp-server location Matanzas snmp-server contact Admin

snmp-server enable traps snmp linkdown linkup snmp-server enable traps mac-notification

snmp-server host 192.168.9.51 public mac-notification snmp

7.3 Conclusion

In this chapter we presented the essential steps to build and configure a Network Admission Control solution for both NAC Framework and NAC Appliance approaches. We covered the installation and configuration for required client and server components and the router and switch configuration.

At this point we have finished the setup of the basic compliance and network enforcement subsystem. The configuration of the remediation subsystem is covered in Chapter 8, “Remediation subsystem implementation” on page 355.

354Building a Network Access Control Solution with IBM Tivoli and Cisco Systems