∙CISCO PPP - Cisco PPP options will be used.
2.Compression - Turn on the Stac Compression. The default for this field is Off.
3.Multiple Link Options: BOD Calculation - Select the direction of the traffic you wish to calculate in order to determine when to add or subtract a link. The default for this field is Transmit or Receive.
4.Multiple Link Options: Base Trans Rate - Select the base data transfer rate for this Remote Node. This parameter is in kilobits per second (Kbps). There are two options for this field:
∙64 - Only one channel will be used.
∙128 - Two channels will be used when a packet triggers a call.
5.Multiple Link Options: Max Trans Rate - Enter the maximum data transfer rate allowed for this Remote Node. This parameter is in kilobits per second. There are two options for this field:
∙64 - At most one channel can be used.
∙128 - A maximum of two channels can be used.
6.Multiple Link Options: Target Utility - Enter the two thresholds separated by a - for subtracting and adding the second channel. The default is
7.Multiple Link Options: Add Persist - This parameter specifies the number of seconds there traffic is above the adding threshold before the Prestige will bring up the second channel. The default is 5 seconds.
8.Multiple Link Options: Subtract Persist - This parameter specifies the number of seconds where traffic is below the subtraction threshold before the Prestige drops the second channel. The default is 5 seconds.
