ZyXEL Communications Prestige 128 user manual ∙ ∙ ∙ Ethernet ∙ SNAP

Figure 8-2 Menu 3.3 - Novell IPX Ethernet Setup

1.Seed Router - Determine if the Prestige is to act as a seed router. This value depends on the existing network. If there is a NetWare server providing the network number, select No. If there is no NetWare server providing the network number, select Yes.

2.Frame Type - For every frame type that the Prestige needs to support, you need to set the corresponding field to Yes. The frame type(s) selected here must be the same frame type(s) as the server or client stations on that network. Otherwise, the devices will not be able to communicate. You can select one or more of these four frame types:

∙802.2

∙802.3

∙Ethernet II

∙SNAP

3.IPX Network # - If you selected the Prestige to act as a seed router, you need to provide a unique network number to be associated with the network that the Prestige has joined. Keep in mind that this number must not be used anywhere else on the entire internetwork.

Novell IPX Configuration 81