ZyXEL Communications Prestige 128 user manual Menu 12.4 Bridge Static Route

Figure 9-3 Menu 12.4 - Bridge Static Route

1.Route Name - For identification purposes enter a name for the bridge static route.

2.Active - Indicates whether the static route is active or not.

3.Ether Address -Enter the MAC address of the destination device that you wish to bridge your packets to.

4.IP Address - If available, enter the IP address of the destination device that you wish to bridge your packets to.

5.Gateway Node - Enter the number (1-4) of the Remote Node that is linked to this static route. When an incoming packet’s destination Ether (MAC) address matches the value entered above, then it will trigger a call to this Remote Node.

Once you have completed filling in the menu, press ENTER at the message: Press ENTER to Confirm ... to save your selections, or press ESC at any time to cancel your selections.

Bridging Configuration 93