Manuals / ZyXEL Communications / Computer Equipment / Network Router

ZyXEL Communications Prestige 128 user manual Installation

Models: Prestige 128

1 157

Download 157 pages 54.29 Kb

Page 51

itself uses the first address in the block, and the remaining addresses in the pool are assigned to clients.

4.Primary DNS Server/Secondary DNS Server - These two fields are used by DHCP clients (such as Windows 95 and Windows NT systems) for Domain Name Servers. Usually your Internet provider will provide one or more name service hosts.

5.IP Address - Enter the IP address of the Prestige in dotted decimal notation (four 8-bit numbers, between 0 and 255, separated by periods), e.g., 192.68.135.5. Note that every machine on the TCP/IP network must have a unique IP address.

6.IP Subnet Mask - An IP address consists of two parts, the network ID and the host ID. The IP Subnet Mask is used to specify the network ID portion of the address, expressed in dotted decimal notation. The Prestige will automatically calculate this mask based on the IP address that you assign. Unless you have special need for subnetting, use the default subnet mask calculated by the Prestige.

7.RIP Direction - This parameter determines how the Prestige handles RIP (Routing Information Protocol). If set to Both (default), the Prestige will broadcast its routing table on the LAN, and incorporate RIP broadcasts by other routers into its routing table. If set to In Only, the Prestige will not broadcast its routing table on the LAN, if set to Out Only, the Prestige will broadcast its routing table but ignores any RIP broadcast packets that it receives. If set to None, the Prestige will not participate in any RIP exchange with other routers.

Usually, you should leave this parameter at its default of Both and let RIP propagate the routing information automatically.

When you are finished, press ENTER at the message: Press ENTER to Confirm... to save your selections, or press ESC at any time to cancel them.

38 Installation

Image 51

ZyXEL Communications Prestige 128 user manual Installation

Contents

Version ACCESSING INTERNET & INTRANETJiH5 Prestige User’s ManualZyXEL Limited Warranty Copyright 1997 by ZyXEL AcknowledgmentsFCC Part 15 Information Information for Canadian Users Page ∙ E-mail Contacting ZyXELZyXEL Communications Corporation 1 Introduction Contents3 Installation 4 Configuring for Internet Access2 Before You Begin 8 Novell IPX Configuration 5 Remote Node Configuration6 Dial-In Configuration 7 TCP/IP Configuration11 SNMP 10 Filter Configuration13 Telnet Configuration and Capabilities 14 System Maintenance15 Troubleshooting 16 ISDN Switch Types17 Index xiii Features Ease of InstallationIntroduction Dial On Demand ISDN Basic Rate Interface BRIMultiple Networking Protocol Support Standard Phone JackPPP Security RADIUS Remote Authentication Dial In User ServiceDHCP Support Dynamic Host Configuration Protocol Full Network ManagementNetworking Compatibility Internet AccessApplications For Your Prestige Data CompressionTelecommuting Server What This Manual CoversWhat This Manual Doesn’t Cover Other ResourcesPacking List Additional Installation Requirements 8 Introduction Road Map and Flow Before You BeginCompleting the Worksheet Figure 2-1 Installation Guide10 Before You Begin Ordering Your ISDN Line Collecting General Setup InformationNo of Phone #s Collecting ISDN Phone Line InformationSwitch Type GeographyAmerica, select your ISDN switch type. For DSS1 and 1TR6, verify this field to make sure that you have the proper firmware loaded 14 Before You Begin Collecting Ethernet Setup InformationBefore You Begin IP Subnet MaskNumber of Host IDs Number of Bits16 Before You Begin General Setup InformationISDN Setup Information Prestige Setup and Installation Worksheet∙ Analog Call check one North America ISDNDSS1 ISDN ∙ 1st Telephone Number∙ PBX Number S/T Bus Number 1TR6 ISDN∙ A/B Adapter 2 Number & Subaddress ∙ Outside Line Prefix Number∙ PBX Number S/T Bus Number Ethernet Setup Information∙ A/B Adapter 2 Number ∙ Outside Line Prefix Number20 Before You Begin Installation Connecting Your Computer and Your PrestigeA Warning On Connection Cables 22 Installation Connecting the RS-232 Cable to your PrestigeConnecting an ISDN Line to your Prestige Connecting a Telephone/Fax to your PrestigeConnecting an Ethernet Cable to your Prestige ∙ UTP∙ AUI Prestige Front Panel Connecting a Power Adapter to your PrestigeFigure 3-3 Power on Messages Powering On Your PrestigeFigure 3-4 Login Screen Navigating Through the System Management Terminal InterfaceMain Menu, where typing 99 is the only method to exit the SMT Menu Title System Management Terminal Interface Summary28 Installation Figure 3-5 SMT Main MenuGeneral Setup North American ISDN ISDN Setup1. Switch Type - Verify the switch type information with your telephone company. For North America, select the type of switch used by your telephone company. If your switch type is not currently shown, press the space bar to change to the next switch repeat until you see the correct switch type. The Prestige will not be able to place or to receive calls if the wrong switch type is specified. If you are not sure, contact your telephone company to confirm the exact switch type DSS1 & 1TR6 ISDN 6. Dial Prefix to Access Outside Line - Enter the prefix number if the Prestige is connected to an ISDN PBX. This number will be added to all outgoing calls and should be no longer than 3 digits. Otherwise, leave this field blank 34 Installation General Ethernet Setup Ethernet SetupFigure 3-11 Menu 3.1 - General Ethernet Setup TCP/IP Ethernet Setup and DHCPFigure 3-12 Menu 3.2 - TCP/IP Ethernet Setup 38 Installation Refer to the chapter on Bridging configuration Novell IPX Ethernet SetupBridge Ethernet Setup Refer to the chapter on Novell IPX configurationConfiguring for Internet Access Configuring for Internet Access IP Addresses and the InternetFigure 4-2 Menu 4 - Internet Access Setup Internet Access Configuration5. My Login Name - Enter the login name given to you by your ISP 44 Configuring for Internet Access Single User AccountIn summary Configuration for Single User Account Configuring Backup ISP Accounts 48 Configuring for Internet Access Configuring for Internet Access 50 Remote Node Configuration Remote Node ConfigurationFigure 5-1 Menu 11 - Remote Node Setup Remote Node ConfigurationFigure 5-2 Menu 11.1 - Remote Node Profile 52 Remote Node Configuration ∙ PAP sends the user name and password in plain text 54 Remote Node Configuration 18. Telco Options Allocated Budget min - This field will set a budget outgoing call time for the Remote Node. The default for this field is 0 for no budget control 56 Remote Node Configuration Bandwidth on DemandEditing PPP Options ∙ 64 - Only one channel will be used ∙ 128 - Two channels will be used when a packet triggers a call58 Remote Node Configuration ∙ CISCO PPP - Cisco PPP options will be usedRemote Node Configuration to confirm your selections, or press ESC to cancel your selections60 Dial-In Configuration Dial-In ConfigurationTelecommuting Dial-In Server ApplicationFigure 6-1 Example of Remote User Telecommuter Figure 6-2 Example of a Dial-In Server Application Default Dial-In Setup∙ None - No CLID is required 64 Dial-In Configuration 11. IP Pool IP Start Addr - This field is active only if you 66 Dial-In Configuration Dial-In Users SetupFigure 6-5 Menu 14.1 - Edit Dial-in User Figure 6-4 Menu 14 - Dial-in User Setupare displayed with a - minus sign at the beginning of the name in Menu More on CLID IP Subnet Mask TCP/IP ConfigurationTCP/IP Configuration LAN-to-LAN ApplicationRemote Node Setup See page for more information on the Single User Account feature 74 TCP/IP Configuration Static Route SetupFigure 7-4 Static Routing Example Figure 7-5 Menu 12 - Static Route Setup - Main Menu76 TCP/IP Configuration Figure 7-6 IP Static Route Setup6. The Metric and the Private parameters have the same meaning as those in the Remote Node Setup Network Numbers Novell IPX ConfigurationIPX Network Environment Frame TypePrestige on LAN with Server Prestige on LAN without ServerFigure 8-1 Prestige Operating in IPX Environment IPX Spoofing IPX Ethernet Setup∙ ∙ ∙ Ethernet ∙ SNAP Figure 8-3 LAN-to-LAN application Remote Node Setup82 Novell IPX Configuration LAN-to-LAN Application1. Route - Make sure IPX is among the protocols in the Route field 84 Novell IPX Configuration Static Route SetupFigure 8-6 Menu 12.2 - Edit IPX Static Route Figure 8-5 NetWare Servers on Both Sides of the Link86 Novell IPX Configuration Novell IPX Configuration Bridging Configuration 88 Bridging ConfigurationIPX Spoofing Bridge Ethernet Setup Figure 9-1 Bridge Ethernet Setup 90 Bridging ConfigurationLAN-to-LAN Application need to configure a Remote Node in order to dial out to another office Remote Node SetupDefault Dial-In Setup for Bridge Bridge Static Route Setup92 Bridging Configuration Figure 9-3 Menu 12.4 - Bridge Static Route About Filtering Filter ConfigurationConfiguring a Filter Set Prestige’s Filter StructureFilter Configuration ∙ # - Refers to the filter rule number ∙ Pr - Protocol ∙ SA - Source Address ∙ SP - Source Port number TCP/IP Filter Rule Configuring a Filter Rule∙ Yes ∙ No 100 Filter Configuration ∙ Yes - filter match only established TCP connections Figure 10-5 Menu 21.1.1 - Generic Filter Rule Generic Filter RuleNovell IPX Filter Rule ∙ None ∙ RIP Request ∙ RIP Response ∙ SAP Request ∙ SAP Response Configuring Your Prestige For SNMP Support SNMPAbout SNMP SNMP Figure 11-1 Menu 22 - SNMP Configuration108 SNMP SNMP Using RADIUS Authentication Installing a RADIUS ServerSystem Security Configuring the Prestige for RADIUS Authentication This will bring you to Menu 23.2 - System Security - External Server Adding Users to the RADIUS Database Using RADIUS Authentication for CLIDConfiguring the SMT Password 5. Re-type your new system password for confirmation purposes and press ENTER About Telnet Configuration Telnet Configuration and CapabilitiesSingle Administrator System TimeoutTelnet Capabilities System Status System Maintenance2. From this menu, select option 1. System Status 8. TXPkt - the number of transmitted packets on this channel Figure 14-3 LAN Packet Which Triggered Last Call Terminal Baud RateLog and Trace Syslog And Accounting View Error LogDiagnostic Figure 14-6 Menu 24.4 - System Maintenance - Diagnostic 126 System Maintenance Backup Configuration Software Update Restore ConfigurationCommand Interpreter Mode Call ControlFigure 14-9 Example of uploading RAS using PCPLUS Figure 14-10 Menu 24.9.1 Call Control Parameters Call Control ParametersFigure 14-11 Blacklist BlacklistFigure 14-12 Budget Management Budget ManagementSystem Maintenance Connecting the RS-232 cable, cannot access the SMT TroubleshootingProblems Starting Up the Prestige None of the LEDs are on when you power up the PrestigeProblems With the ISDN Line The ISDN initialization failedThe ISDN loopback test failed Problems with the LAN Interface Problems Connecting to a Remote Node or ISPCan’t PING any station on the LAN Problems Connecting to a Remote User ISDN Switch Types Provisioning For U.S. SwitchesProvisioning For the AT&T 5ESS Switches Setting Provisioning FeatureSetting Provisioning FeatureProvisioning Feature Provisioning For the Northern Telecom SwitchProvisioning Feature SettingEKTS Provisioning FeatureSetting ISDN Switch TypesIndex See IPX PABX IOC, 11. See ISDN Ordering Code IP Address, 14144 Index