Printing a Configuration Report
1Press Menu/Exit to enter the menu.
2Press to select Report Print, press Enter.
3Press or to select Configuration, press Enter.
4The report prints.
5Press Stop to cancel printing.
Changing Operation Functions
1Press the Menu/Exit key to enter the menu.
2Enter the speed access number of the operator function you want to change.
3When the display shows the operator function you want, press or to select the setting, then press
Enter
or
©ˇ
4Press Menu/Exit to return to standby mode.
List of Operation Functions
Remote Diagnosis
Speed access no. 14.
The remote diagnostics feature allows service personnel to remotely dial and service the machine. This setting should remain OFF unless a service represtnative has asked you to turn it ON.
Available settings are ON and OFF.
The default setting is OFF.
Transmission (TX) Mode Default
Speed access no. 15.
!When you enter speed access number 15, you move directly into the resolution settings.
This function sets the machine’s default settings for original document condition and transmission scanning resolution (Type of Original and Resolution).
If you routinely send or receive faxes that require a different settings, use the Transmission (TX) Mode Default to change the settings to match your requirements.
