During the programming sequence, the new default combination is shown on the display panel.
The default settings are standard (STD) and normal (Normal).
Memory Full Save
Speed access no. 17
With features like group dialing, dialing starts after an entire document or set of documents is read into memory.
When this function is set to ON, a message displays when memory becomes full and an operator time out seems likely during the dialing process.
When this function is set to OFF, data not read into memory is deleted automatically.
When set to ON, and memory fills up, all but the last scanned page can be sent to the specified location(s). The remaining page(s) can then be sent as a separate communication.
Available settings are ON and OFF.
The default setting is OFF.
Instant Dial
Speed access no. 18
In the ON state, the document is scanned into memory and dialing starts immediately. Although the function relies on
memory availability, connection to the remote location is confirmed and the document transmitted faster when memory is available. If it is set to OFF, the machine first confirms contact with the remote location and then transmits the document reading from the document tray (without scanning into memory).
Available settings are ON and OFF.
The default setting is ON.
Restrict Access
Speed access no.19
This function controls whether or not machine operation is restricted.
When set to ON (if restriction IDs have been programmed), users must enter a password before being allowed access to the machine’s functions.
When set to OFF, no password is required (even if restriction IDs have been programmed).
Available settings are ON and OFF.
The default setting is OFF.
