For your machine, that location is Auto Dial 99 (Relay Report Number).
!Be sure to program the number in the format the relay key station uses for dialing. For example, be sure to include the access digit, if required.
Programming the Relay Report Number
1Press Menu/Exit to enter the menu.
2Press to select Location Program, press Enter.
3Press to select Relay Report No., press Enter.
4Enter the telephone number of the desired location using the numeric keypad (40 characters max.), press Enter.
5Press Menu/Exit to return to standby mode.
Relay Broadcast Report
The relay key station (hub) can send a confirmation report to the relay initiating station when the relay fax session is complete.
This confirmation report is called the Relay Broadcast Report.
To receive the report, the telephone number of the relay initiating station must be programmed into the specified
Auto Dial location. For your machine, that location is Auto Dial 99 (Relay Report Number).
!Be sure to program the number in the format the relay key station uses for dialing. For example, be sure to include the access digit, if required.
The Relay Broadcast Report shows:
·the page count of the original fax
·the location identification of each destination machine the relay key station (hub) communicated with during the relay fax session
·the page count of each fax sent to each destination machine
·the results of each destination fax session
Initiating a Relay Broadcast
1Load the document(s).
2Press Menu/Exit to enter Menu.
3Press to select Relay Initiate TX, press Enter.
4Enter the password
5Enter
