Oki 59502, 5750 manual Signal Tones, Accessing Second Panel of One-Touch Keys Model

Accessing Second Panel of One-Touch Keys (Model 5950)

To access the second panel of One-Touch keys (41-80), grasp the latch at the bottom of the keypad and lift up on the main panel, swinging it up and to the right. After pressing the desired key(s), close the main panel.

!The One Touch Sheet(s) provide space for Speed Dial numbers 1 through 40 (Model 5750) or 1 through 80 (Model 5950). For for higher Speed Dial numbers, program the number(s) and print the Telephone Directory. For more information, see “Reports, Telephone Directory.”

Signal Tones

The machine emits sounds to identify specific conditions.

Key Select Tone: This is a short beep that is emitted each time a key is pressed.

Error Tone: If an inappropriate key is pressed, the machine emits three short beeps. If there is a problem with operations during communications, the machine emits five long beeps. Press the Stop key to stop the beeping (turn the error

tone off), and then print a Message Confirmation Report to check the source of the problem. To print the report, press the Enter key twice (with no documents loaded).

End of Session Tone: At the end of each successful faxing session, the machine emits a long beep to confirm that there were no errors or problems in the communication.

Off-Hook Alarm Tone: If the machine is equipped with a telephone handset, and if the receiver of the handset is left out of the cradle when not in use, the machine emits an intermittent warbling sound. To turn off the sound, return the receiver to its cradle or press the Stop key.

User’s Guide: English 31