IBM Tivoli and Cisco manual Example 8-9 Content of Sample.properties file for TCRNavScan

3.Next we create the configuration file for the sputil.sh utility containing the instructions how to build the package. Copy the Sample.properties file from sample_TCRNavScan directory to the TCRNavScan directory and edit it with the text editor to match the content specified in Example 8-9.Especially make sure that:

WorkflowName Equals the name of the workflow that matches the value of the SCAN_WF parameter in the policy.

SourceFilename[0] Equals the name for the script file located in the same directory.

TmfWebUIEndpoint Equals the name of the Tivoli Framework endpoint located on the Web Gateway. If you followed the installation instruction from this book it will be the host name of that server.

Leave the other values as is. They are used by the utility during the package creation.

Example 8-9 Content of Sample.properties file for TCRNavScan

#The WorkflowName parameter below will determine the name of the package #Make sure it matches the name of the one you want to generate WorkflowName=TCRNavScan

SourceFilename.arrayLength=1

DestinationPath.arrayLength=1

SourceFilename[0]=NavScanMessage_en.wsf

RegistryKeyForExePathName.arrayLength=1

ExeName.arrayLength=1

ExeArg.arrayLength=1

RegistryKeyForExePathName[0]=

ExeName[0].format=wscript.exe

ExeArg[0].arrayLength=1

ExeArg[0][0].format="${DestinationPath[0]}"

# Specify the name of your endpoint in the line below TmfWebUIEndpoint=tcmweb

4.Make sure that the Tivoli Object Dispatcher service is running. You may check it in the services window or by using the following command:

odadmin odlist

420Building a Network Access Control Solution with IBM Tivoli and Cisco Systems